Golf Mk5
| Assembly overview - door handle and door lock |
Note| The right side is shown. The left side is similar. |
| 1 - | Door lock |
| q | Door lock can only be removed together with door outer panel |
| q | Removing and installing → Chapter |
| 2 - | Retaining bracket |
| q | Not installed on Golf |
| 3 - | Spreader rivet |
| q | Not installed on Golf |
| 4 - | Cable |
| q | To release lock from inner door handle |
| 5 - | Cover |
| q | Not supplied as part of door lock |
| q | Secured to door lock with three locking lugs |
| 6 - | Bearing plate |
| q | Removing → Chapter |
| 7 - | Bolt |
| 8 - | Base |
| q | Part of door handle |
| 9 - | Door handle with base |
| q | Removing and installing → Chapter |
| 10 - | Cover |
| q | For lock cylinder housing with no opening for lock cylinder |
| q | Secured to lock cylinder housing with three locking lugs |
| 11 - | Housing |
| q | Removing and installing → Chapter |
| q | Without cylinder lock |
| 12 - | Base |
| 13 - | Torx screw |
| q | Socket -T 10072- |
| q | Loosening this screw releases the lock cylinder housing → Item, which can then be pulled out of the bearing plate |
| 14 - | Bolt |
| q | 18 Nm |
| 15 - | Cable |
| q | To release lock from outer door handle |
