Fuel feed to Thermo Top V |
Note t
| The illustration shows the Golf V. The installation positions of the auxiliary heater components on the Golf VI are identical. |
t
| Fuel lines are secured with O-type clips. These O-type clips must always be replaced with screw-type clips. |
t
| To start the auxiliary heater, the following conditions are required: ambient temperature sensor -G17- is pulled off and the coolant temperature is below 50 °C. |
t
| If the fuel tank was empty, there may be air in the fuel line to the auxiliary heater. To remove air from the fuel line, start auxiliary heater repeatedly until it does not go out by itself. |
t
| Observe the rules for cleanliness when doing all work on the fuel supply system → Chapter. |
|
|
|