| When working on the fuel supply/injection system, carefully follow the „5 rules“ below: |
| t
| Thoroughly clean all connections and adjacent areas before disconnecting. |
| t
| Place parts that have been removed on a clean surface and cover. Do not use fluffy cloths! |
| t
| Carefully cover or seal opened components if the repair cannot be carried out immediately. |
| t
| Install clean parts only; remove replacement parts from their packages only immediately before installing them. Do not use any parts which have not been stored in their packaging (e.g. in a tool box). |
| t
| Fuel hoses and pipes may be shortened only with a clean sharp knife. Cutting points must not be soiled or deformed. Cutting points and surfaces must be free of burrs. |
|
|
|
