Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing multifunction switchF125 >
< Multifunction switchF125
Golf Mk5
Power transmission
6-speed automatic gearbox 09G
Automatic gearbox, control, assembly, housing
Multifunction switchF125
Removing multifunction switchF125
Removing multifunction switchF125
Removing multifunction switch -F125-
–
Move selector lever to position „N“.
–
Switch off ignition.
–
Do not open cooling system.
–
In order to remove selector lever cable from gearbox, first release cable
-1-
and then remove it from cable support bracket
-2-
.
Work with care to avoid bending cable. Do not use pliers, or the retaining tabs on the cable support bracket may break off.
–
Lever cable
-1-
off lever
-3-
using an open jaw spanner
-2-
.
–
Pull connector off multifunction switch -F125-.
–
Unscrew nut
-1-
.
–
Remove spring ring
-2-
and lever
-3-
from selector shaft
-4-
.
–
Carefully bend back hooks of lock washer
-2-
using a screwdriver.
–
If hooks are broken off, renew lock washer.
–
Unscrew nut
-1-
.
–
Unscrew bolt
-5-
.
–
Pull multifunction switch
-4-
, together with washers
-2-
and
-3-
, off selector shaft
-6-
.
Power transmission
6-speed automatic gearbox 09G
Automatic gearbox, control, assembly, housing
Multifunction switchF125
Removing multifunction switchF125
Installing multifunction switchF125 >
< Multifunction switchF125