Golf Mk5
Repairing “LuK” clutch |
1 - | Dual-mass flywheel |
q | Removing and installing → Engine, mechanics; Rep. Gr.13 |
q | Ensure that centring pins fit tightly |
q | Contact surface for clutch lining must be free of grooves, oil and grease |
2 - | Clutch plate |
q | Determine diameter according to → Electronic parts catalogue (ETKA). |
q | Removing and installing → Chapter |
q | Installation position: → Fig. |
3 - | SAC pressure plate |
q | SAC means “self-adjusting clutch”. |
q | Allocation → Electronic parts catalogue “ETKA” |
q | Removing and installing → Chapter |
q | Check ends of diaphragm spring → Fig. |
q | Checking spring connections and riveted connections → Fig. |
4 - | Bolt M6 13 Nm |
q | Loosen or tighten diagonally in small steps |