Golf Mk5
| Assembly overview - poly V-belt drive |
| 1 - | Pulley and vibration damper |
| q | Can only be installed in one position. Holes are off-set |
| 2 - | 25 Nm |
| 3 - | Alternator |
| 4 - | Bracket |
| q | For alternator and air conditioner compressor. |
| 5 - | Tensioning device for poly V-belt |
| q | Swing with open jaw spanner to slacken poly V-belt. |
| 6 - | 25 Nm |
| 7 - | Air conditioner compressor. |
| 8 - | 25 Nm |
| 9 - | Dowel sleeves |
| 10 - | Poly V-belt |
| q | Mark direction of rotation before removing. |
| q | Check for wear. |
| q | Do not kink. |
| q | Removing and installing → Chapter. |
