Golf Mk5
| Assembly overview - oil filter, engine oil cooler and oil pressure switch -F1- |
| 1 - | Bracket for ancillaries |
| q | Removing and installing → Chapter |
| 2 - | Oil pressure switch -F1- |
| q | 1.4 bar - black |
| q | Check → Chapter. |
| q | 20 Nm |
| q | Remove with articulated wrench AF 24 -T40175- |
| 3 - | Seal |
| q | Renew. |
| 4 - | O-ring |
| q | Renew. |
| 5 - | O-ring |
| q | Renew. |
| 6 - | Valve unit |
| 7 - | Oil filter |
| q | 22 Nm |
| q | Remove and install with oil filter tool -3417-. |
| 8 - | Bolt |
| q | 15 Nm |
| 9 - | Connection |
| 10 - | Seal |
| q | Renew. |
| 11 - | Engine oil cooler |
| q | See note → Chapter. |
| q | Ensure clearance to adjacent components. |
| q | Coolant hose schematic diagram → Chapter. |
| q | Removing and installing → Chapter |
| 12 - | Seal |
| q | Renew. |
| 13 - | Bolt |
| q | Tightening sequence → Fig.. |
