Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Power unit | 4-cylinder injection engine (1.8 and 2.0 l engine, chain drive) | Engine lubrication | Sump and oil pump | Removing and installing coarse oil separator

Removing and installing coarse oil separator

Removing

–	Remove noise insulation → General body repairs, exterior; Rep. gr.50.

–	Unscrew bolts -1 … 9- and remove coarse oil separator.

Caution

Danger of soiling lubrication system.

Close opening with clean cloth.

Installing

Note

t	Renew gaskets and seals.

t	Secure all hose connections with the correct type of hose clips (same as original equipment) → ETKA (electronic parts catalogue).

Install in the reverse order of removal. When doing this, note the following:

–	Tighten bolts in the sequence -1 … 9- to 9 Nm.

Volkswagen Workshop Service and Repair Manuals