volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview - sound generator (Golf, Scirocco) > < Charge air system

Golf Mk5

Assembly overview - charge air cooler (Golf, Scirocco)
Assembly overview - charge air cooler (Golf, Scirocco)
  Caution
The screw-type clips on the charge air pipes must be tightened to 5.5 Nm. If the torque is too low or too high, the charge air hose may slip off the charge air pipe during vehicle operation.
  Note
The sound generator is not fitted on all vehicles.
   
1 - 5 Nm
2 - Mounting
q   For charge air cooler.
3 - Charge air cooler
q   Removing and installing → Chapter
4 - Charge air pipe
5 - 10 Nm
6 - Charge air hose
q   Fitting hose connections with plug-in connectors → Chapter
7 - Charge air pipe
q   To sound generator
8 - Charge air hose
q   Fitting hose connections with plug-in connectors → Chapter
9 - Hose clip
10 - Charge air hose
q   To throttle valve module -J338-.
11 - Charge air hose
12 - Charge air pipe
13 - Charge air hose
14 - 8 Nm
15 - Sound generator
q   Fasteners → Chapter
16 - Charge air pipe
17 - Charge air hose
q   Fitting hose connections with plug-in connectors → Chapter
18 - Charge air pressure sender -G31-
19 - 5 Nm

   

Assembly overview - sound generator (Golf, Scirocco) > < Charge air system