Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing engine speed senderG28 >
< Removing and installing ignition coils with output stage
Golf Mk5
Power unit
4-cylinder injection engine (1.8 and 2.0 l engine, chain drive)
Ignition system, glow plug system / Repairing ignition system
Removing and installing knock sensor 1G61
Removing and installing knock sensor 1G61
Removing and installing knock sensor 1 -G61-
Removing
–
Pull electrical connector
-2-
off knock sensor I -G61-.
–
Remove coolant pump
→ Chapter
.
Note
The knock sensor I -G61- is located under the intake manifold behind the coolant pump.
–
Undo bolts of knock sensor I -G61- and remove it.
Installing
–
Install in reverse order.
l
Specified torque
→ Chapter
.
Power unit
4-cylinder injection engine (1.8 and 2.0 l engine, chain drive)
Ignition system, glow plug system / Repairing ignition system
Removing and installing knock sensor 1G61
Removing and installing engine speed senderG28 >
< Removing and installing ignition coils with output stage