Golf Mk5
| Part 3 Oil filter bracket |
| 1 - | Pipe |
| q | For crankcase ventilation. |
| 2 - | Oil pressure switch -F1- |
| q | 1.4 bar, black. |
| q | Check → Chapter. |
| q | Removing and installing → Chapter. |
| q | Specified torque: 20 Nm. |
| q | With earth wire for oil pressure switch (only with single pin oil pressure switch). |
| 3 - | 15 Nm + turn 90° further |
| q | Renew. |
| q | With earth wire for oil pressure switch (only with single pin oil pressure switch). |
| 4 - | Bracket |
| 5 - | 25 Nm |
| 6 - | Oil cooler |
| q | See note → Chapter. |
| q | Ensure clearance to adjacent components. |
| 7 - | Gasket |
| q | Renew. |
| 8 - | 15 Nm + turn 90° further |
| q | Renew. |
| 9 - | Seal |
| q | Renew. |
| q | Oil before installing. |
| q | Service tag at top |
| 10 - | Dust cap |
| 11 - | Oil filter housing |
| q | 25 Nm |
| q | Remove and install with oil filter tool -3417-. |
| q | Emptying fuel tank → Chapter. |
| 12 - | Oil filter element |
| q | Empty oil filter housing before removing → Chapter. |
| q | Change → Booklet. |
| 13 - | Baffle plate |
| 14 - | Gasket |
| q | Renew. |
| 15 - | Oil filter bracket |
| q | With pressure relief valve, approx. 4 bar. |
| q | Removing and installing → Chapter. |
| 16 - | Spring-type clip |
