volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing throttle valve moduleJ338 > < Assembly overview - fuel rail (vehicles from 05.2006)

Golf Mk5

Removing and installing fuel rail
Removing and installing fuel rail
Removing:
–  Remove intake manifold → Chapter.
–  Remove hoses from activated charcoal filter.
   
–  To do this, open hose clip -1-.
–  Unscrew two bolts -arrows- on fuel rail.
  A24-10115
–  Disconnect hose connection -1- from intake manifold and loosen the two bolts -arrows-.
–  Disconnect union nuts of the two fuel pipes -2 and 3-. At the same time counterhold pressure limiting valve.
–  Carefully pry off linkage from intake manifold flap motor -V157--4-.
–  Unbolt intake manifold flap motor -V157--5-.
  A24-10116
–  Remove fuel rail from intake manifold.
Installing:
–  Install in reverse order.
Specified torques (vehicles to 05.2006) → Chapter.
Specified torques (vehicles from 05.2006) → Chapter.
  A24-10117

Removing and installing throttle valve moduleJ338 > < Assembly overview - fuel rail (vehicles from 05.2006)