volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing cylinder head > < Installing

Golf Mk5

Checking semi-automatic toothed belt tensioning roller
Checking semi-automatic toothed belt tensioning roller
   
Installation position
The retainer -arrow- must locate in notch in cylinder head.
Condition
l  The engine must be no more than warm to touch.
Test procedure
–  Position crankshaft at TDC for cylinder No. 1.
  A13-0078
–  Press toothed belt forcefully with thumb. The indicator -2- must move.
–  Release toothed belt and turn crankshaft two full revolutions in direction of engine rotation until engine is again at TDC No. 1 cylinder. It is important that the last 45° of rotation (1/8 turn) is performed without interruption.
–  The tensioning roller must return to its initial position. (Notch -1- and indicator -2- align again.)
  Note
Check using a mirror.
  N13-0402

Removing and installing cylinder head > < Installing