Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Power unit | 6-cylinder injection engine | Engine cooling | Removing and installing parts of cooling system | Removing and installing fan support with fans

Removing and installing fan support with fans

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1331-

Removing

–	Remove noise insulation → General body repairs, exterior; Rep. gr.50

–	Unclip coolant hose from fan support.

–	Remove air duct from air filter → Chapter.

–	Separate connector -1- and remove fan support securing bolts -arrows-.

–	Remove fan support with fans.

–	Separate connection -1- and free wiring.

–	Remove securing nuts -arrows- and remove fans.

Installing

Installation is carried out in the reverse order. When installing, note the following:

Specified torques:

Volkswagen Workshop Service and Repair Manuals