volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Renewing crankshaft sealing flange -vibration damper side- > < Assembly overview - sealing flange

Golf Mk5

Removing and installing crankshaft seal on gearbox side
Removing and installing crankshaft seal on gearbox side
Special tools and workshop equipment required
   
t  Fitting tool -T10122-
  W00-1234
t  Puller hooks -T20143-
Removing
  W00-2958
–  Fit puller hooks -T20143/2- behind sealing lip of oil seal as shown in illustration.
–  Support puller hook -T20143/2- on sealing flange and lever seal out in direction of -arrow-.
Installing
  N13-0871
–  Pull oil seal -A- by the outside over the sleeve -T10122/1- onto pulling sleeve -T10122/2-.
–  Separate the two fitting sleeves.
–  Then set pulling sleeve -T10122/2- with dry oil seal onto crankshaft journal.
  N13-0782
–  Now drive it into sealing flange to stop using thrust piece -T10122/3-.
  N13-0829

Renewing crankshaft sealing flange -vibration damper side- > < Assembly overview - sealing flange