| Installation is carried out in the reverse order. When installing observe the following: |
| –
| Tighten securing bolts on headlight to specified torques → Chapter. |
| –
| Check headlight installation position is central, i.e. shut lines/gaps are equal around headlight. |
| If the shut lines/gaps around the headlight are uneven, the installation position must be adjusted → Chapter. |
| –
| Check headlight functions. |
Note | If a headlight is removed, it should always be adjusted following installation. |
| –
| Check headlight setting and adjust headlight as necessary → Booklet38. |
|
|
|
