volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Parking aid > < Removing and installing ignition/starter switch

Golf Mk5

Removing and installing ignition key withdrawal lock solenoidN376
Removing and installing ignition key withdrawal lock solenoid -N376-
The ignition key withdrawal lock solenoid -N376- is located very close to the ignition starter key.
  Note
To remove ignition key on vehicles with an automatic gearbox, always move selector lever to position „P“ first then switch off ignition. Otherwise the ignition key withdrawal lock solenoid -N376- will inhibit the removal of the ignition key.
Removing:
–  Remove steering column electronics control unit -J527- → Chapter.
   
–  Release fastener -2- using a suitable screwdriver.
–  Pull ignition key withdrawal lock solenoid -N376--1- in direction of arrow and out of its mounting.
–  The electrical connection will be disconnected automatically.
Installing:
–  Installation is carried out in the reverse order. When installing observe the following:
  Note
After reconnecting the battery, carry out final control diagnosis to activate ignition key withdrawal lock solenoid -N376- → Chapter.
  N94-10303

Parking aid > < Removing and installing ignition/starter switch