–
| Pull retainer -4- off hose connection. |
–
| Pull hose connection off pop-up spray jet cylinder -2-. |
–
| Remove securing bolt -1-. |
–
| Unclip pop-up spray jet cylinder -2- out of bracket -3- |
Install in the reverse order of removal. When doing this, note the following: |
–
| The hose leading to the pop-up spray jet cylinder must be clipped into the hose retainer. |
–
| Tighten all threaded connections to specified torques → Chapter. |
–
| On completion of installation work, bleed headlight washer system → Chapter. |
|
|
|