Golf Mk6
| Interior assembly parts - GTI, GTD |
| Remove reinforcing member |
| – | Remove lift cylinder for headlight washer system → Vehicle electrics; Rep. gr.92 |
| – | Unscrew bolts -3-. |
| – | Release detents -arrows- from reinforcing member. |
| Install reinforcing member |
| – | Press reinforcing member -2- into detents -arrows- of bumper cover -1-. |
| – | Tighten bolts, specified torque: 2 Nm |
| Remove assembly part |
| – | Remove fog light → Vehicle electrics; Rep. gr.95 |
| – | Unscrew bolts -3-. |
| – | Release detents from assembly part. |
| Install assembly part |
| – | Press assembly part -4- firmly into detents in bumper cover -1-. |
| – | Tighten bolts, specified torque: 2 Nm |