Golf Mk6
| Assembly overview |
Note| t | Only the left side is shown. The right side is similar. |
| t | Depending on model variant »R« or »R Line«, it is necessary to take account of slight deviations in the case of a „19" wheel rim“ in the illustration. |
| 1 - | Wheel housing liner rear part |
| q | Material PP/EPDM. |
| q | Altered wheel housing liner, rear part »R« and »R Line« only in the case of 19" wheel rim |
| q | Removing → Chapter |
| q | Installing → Chapter. |
| 2 - | Bolt |
| q | Qty. 7. |
| q | A different number is possible. |
Note| When the wheel housing lining, rear part, is being mounted »R« and »R Line« with 19" wheel rim, it is not permissible to place the upper bolt in the wing. |
| q | Specified torque: 2 Nm |
| 3 - | Wheel housing liner front part |
| q | Material: PP/EPDM |
| q | Altered wheel housing liner, front part »R« and »R Line« only in the case of 19" wheel rim |
| 4 - | Bolt |
| q | Qty. 6. |
| q | Specified torque: 2 Nm |
| 5 - | Expanding nut |
| q | Qty. 7. |
| q | A different number is possible. |
Note| When the wheel housing lining, rear part, is being mounted »R« and »R Line« with 19" wheel rim, the upper expanding nut in the wing must be removed. |
