Golf Mk6
| Installing |
WARNING
|
| – | Position window regulator motor -1- and gently pull door window up and down to facilitate motor and cable drum toothing intermesh. |
| Specified torque for bolts -2- 3.5 Nm. |
| – | Attach connector -3-. |
| – | A new window regulator motor is coded using vehicle diagnosis, testing and information system -VAS 5051 A-. |
| – | After coding, allow the window regulator to run upwards once onto stop in automatic mode and pull switch again for 2 seconds. This programs the upper stop for the window regulator motor. |
| – | Then perform remaining installation in reverse order of removal. |
