Golf Mk6
| Assembly overview - door handle and door lock |
Note| The right side is shown. The left side is similar. |
| 1 - | Door lock |
| q | Removing and installing → Chapter |
| 2 - | Cable |
| q | To release lock from door interior handle. |
| q | With grommet allowing it to pass through on assembly carrier |
| 3 - | Cable |
| q | From door lock to bearing bracket. |
| 4 - | Bearing bracket |
| q | Removing and installing → Chapter |
| 5 - | Bolt |
| q | Specified torque: 4.5 Nm |
| q | Bearing bracket is loosened from door when this bolt is loosened. |
| 6 - | Door handle |
| q | Removing and installing → Chapter |
| 7 - | Cover |
| q | Removing and installing → Chapter |
| 8 - | Cover |
| 9 - | Bolt |
| q | Specified torque: 20 Nm |
| q | Qty. 2. |