Golf Mk6
| Assembly overview - rear door |
| 1 - | Door |
| q | Removing and installing → Chapter |
| q | Adjusting → Chapter |
| 2 - | Trim |
| q | Removing and installing → Chapter |
| 3 - | Window channel |
| q | Removing and installing → Chapter |
| 4 - | Door window |
| q | Removing and installing → Chapter |
| 5 - | Window slot outer seal |
| q | Removing and installing → Chapter |
| 6 - | Window slot inner seal |
| q | Removing and installing → Chapter |
| 7 - | Door lock |
| q | Removing and installing → Chapter |
| 8 - | Bolt |
| q | Qty. 2. |
| q | Specified torque: 20 Nm |
| 9 - | Door joint seal |
| q | Removing and installing → Chapter |
| 10 - | Buffer |
| 11 - | Clip |
| q | For securing assembly carrier |
| 12 - | Assembly carrier |
| q | Removing and installing → Chapter |
| q | With window regulator |
| 13 - | Bolt |
| q | To secure the hinge, different torque settings must be observed. |
| 14 - | Door lower hinge |
| q | With door arrester |
| q | Hinge is not the two-part design |
| 15 - | Door upper hinge |
| q | Hinge is not the two-part design |