volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing bearing bracket > < Removing

Golf Mk6

Installing
   
Installing
  Note
The cover must be fitted before door lock is installed.
–  Push cover -1- onto guide on door lock -2--arrow a-.
–  Push on cover -1- so that it locks into place on door lock in middle area of lock -2--arrow b-.

Further installation is performed in the reverse order of removal.
–  Check whether seal of connector is seated correctly on the door.
l  Afterwards, a functional check must be performed, as an incorrectly adjusted or incorrectly engaged cable cannot open the lock.
   

Removing and installing bearing bracket > < Removing