Golf Mk6
|
|
|
Note| For reasons of clarity, the components in the following illustration are shown removed. |
| – | Insert two wedges -3409-, as shown, into joint between indirect ventilation system -1- and vent -2-. |
| – | Push back panel clips -3- and -4- using wedges -3409- and pull out indirect ventilation system upwards from mountings in vent -arrow-. |
| – | Remove the two bolts -1- (1.5 Nm). |
| – | Release vent -2- in forward area from mountings. |
| – | Insert two wedges -3409- into lower joint of vent -arrows- and press vent upwards out of mounting in dash panel. |
| – | Operate the respective locking devices and separate the wiring harnesses for hazard warning lights switch and front passenger airbag warning lamp. |
