Golf Mk6
| Installing |
| – | Lift seat through front door opening. |
| – | Locate seat on centralizing pins, mounted on sides of tunnel, and into respective openings in floor. |
| – | Tighten bolt -1- (40 Nm). |
| – | Tighten bolt -2- (40 Nm). |
WARNING
|
| If seat cross member mounting plate threads have been damaged: |
| – | Replace the affected seat cross member mounting plate → Rep. gr.51 |
| – | Remove airbag adapter -VAS 6229- or airbag adapter -VAS 6281-. |
| – | Lock side airbag wiring harness -6- into coupling station. |
| – | Depending on vehicle equipment, reconnect all other wiring harnesses into coupling station. |
| – | Secure wiring harness in fastener on floor and fit cover cap -5- onto coupling station. |
| – | Reinstall seat drawer, if fitted. |
| – | Switch ignition on. |
WARNING
|
| – | Reconnect vehicle battery → Rep. gr.27. |
| – | Move seat to foremost position using longitudinal adjustment. |
| – | Tighten bolt -3- (40 Nm). |
| – | Tighten bolt -4- (40 Nm). |
WARNING
|
| If seat cross member mounting plate threads have been damaged: |
| – | Replace the affected seat cross member mounting plate → Rep. gr.51 |
