Golf Mk6
|
– | Unscrew bolt -1- (2.5 Nm). |
– | Using a small screwdriver, press metal tab of retaining clip -2- inwards and pull off handle -3- from adjustment lever -4-. |
Note
For greater clarity, the retaining clip is shown removed in the illustration. |
– | Remove retaining clip -2- from adjustment lever -4-. |
– | Using assembly tool -3399-, grip behind a backrest adjusting wheel detent -5-. |
– | Lever assembly tool -3399- outwards -arrow A- and release backrest adjustment knob from seat. |
– | Unscrew bolt -6- (2.5 Nm). |
– | Detach trim -7- forwards from mountings in seat frame. |