Golf Mk6
|
| – | Using a removal wedge -3409-, lever upper part of door grip moulding -1- upwards out of mountings in door. |
| – | Depending on vehicle equipment, disconnect wiring harnesses from upper part of grip moulding. |
| – | Remove the two bolts -2- in area of grip moulding (4 Nm). |
| – | Remove bolt -3- and the three bolts -4- (2 Nm). |
| – | Using removal pliers -3392-, release bottom section of door trim from mountings. |
| – | Using removal pliers -3392-, release sides of door trim from mountings. |
| – | Pull door trim upwards vertically out of window slot. |
| – | If vehicle is equipped with a radio system, disconnect wiring harness from loudspeaker. |
| – | Disconnect wiring harness of door trim from door control unit. |
| – | Detach Bowden cable -5- from interior door handle -6-. |
| – | Remove bolt -7- (2 Nm) and lever triangular mirror cover -8- out of fasteners using removal wedge -3409-. |
| – | If vehicle is equipped with a radio system, disconnect loudspeaker wiring harness from cover. |
