Golf Mk6
|
– | Using a removal wedge -3409-, lever upper part of grip moulding -1- out of door handle in door trim. |
– | Remove bolts -2- and -3- (4 Nm). |
– | Remove bolt -4- and the three bolts -5- (2 Nm). |
– | Using removal pliers -3392-, release bottom section of door trim from mountings. |
– | Using removal pliers -3392-, release sides of door trim from mountings. |
– | Pull door trim upwards vertically out of window slot. |
– | If vehicle is equipped with a radio system, disconnect wiring harness from loudspeaker. |
– | Disconnect wiring harness of door trim from door control unit. |
– | Detach Bowden cable -6- from interior door handle -7-. |
– | Remove bolt -8- (2 Nm) and lever triangular mirror cover -9- out of fasteners using removal wedge -3409-. |
– | If vehicle is equipped with a radio system, disconnect loudspeaker wiring harness from cover. |