volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing brake master cylinder > < Installing

Golf Mk6

Removing and installing brake light switchF
Removing and installing brake light switch -F-
Removing
–  Remove engine cover panel.
–  In certain vehicles, the intake hose must be removed.
   
–  Separate connector -1- from brake light switch -F-.
–  Remove bolt -2- from brake master cylinder.
–  Pull brake light switch -F--3- from brake master cylinder at bottom and remove from clip at top -4-.
Installing
–  Install in reverse order.
  N47-10108
Specified torque: 
Torx bolt to brake master cylinder5 Nm

   

Removing and installing brake master cylinder > < Installing