Golf Mk6
Assembly overview - brake caliper FNR-G |
Note
t | When carrying out repairs, install all parts supplied in repair kit. |
t | Use only methylated spirits for cleaning the brake. |
t | Apply thin coat of assembly paste G 052 150 A2 to brake cylinder, piston and sealing ring. |
1 - | Dust cap |
q | Fit onto bleeder valve. |
2 - | Bleeder valve, 12 Nm |
q | Apply thin coat of assembly paste G 052 150 A2 to thread before screwing in. |
3 - | Cover caps |
q | Insert into sleeve bearing. |
4 - | Guide pin, 30 Nm |
5 - | Sleeve bearing |
q | Insert into brake caliper. |
6 - | Brake caliper |
q | Must not be unscrewed from one another. |
7 - | Brake carrier |
q | Bolt onto brake caliper. |
8 - | Sealing ring |
q | Removing and installing → Chapter. |
9 - | Piston |
q | Removing and installing → Chapter. |
q | Apply thin coat of assembly paste G 052 150 A2 to piston before installing. |
10 - | Protective cap |
q | Removing and installing → Chapter. |
q | Take care not to damage when inserting piston. |
11 - | Retaining spring |
q | Insert into brake pad retaining spring and press under brake carrier. |