| Air conditioning system with automatic regulation „Climatronic“ |
Note | t
| A warning lamp in the instrument panel controls will indicate that the selected function is active. In addition, the display of the radio or of the radio navigation system will indicate the selected function for a short time when a button is pressed or a regulator is operated. |
| t
| If the warning lamp does not light up after the AC button is pressed, a fault may be stored in the control unit. Call up event memory using vehicle diagnosis, testing and information system -VAS 5051B- (or later model). If the fault entry „Compressor first run not performed“ is stored, an adaption („Compressor first run“) must be carried out in the Guided Fault Finding. |
| t
| You can switch between °C and °F in the radio or radio navigation system display via the main menu in the dash panel insert. Press rocker switch in windscreen wiper lever (or in multifunction steering wheel) to call up main menu. Then select Settings, Units and Temperature. |
| t
| Pressing the AUTO button will cancel all settings which deviate from automatic operation. |
| t
| Deviations from automatic operation ⇒ appropriate operating instructions. |
| t
| OFF button activated, Climatronic out of operation. There is no heating and ventilation. |
| t
| OFF button deactivated, Climatronic in operation. |
| t
| AC button activated, air conditioner compressor switched on. The heating and ventilation operations continue to be controlled electronically. |
| t
| AC button deactivated, air conditioner compressor will be switched to almost zero delivery. The heating and ventilation operations continue to be controlled electronically. |
| t
| In vehicles with start-stop system, note abort conditions: → Chapter |
|
|
|
