Golf Mk6
Assembly overview - rear |
1 - | Temperature sender after high voltage heater (PTC) -G787- |
q | Removing and installing → Chapter |
2 - | Temperature sender after heat exchanger for high voltage battery -G786- |
q | Removing and installing → Chapter |
3 - | Manual breather valve for coolant circuit |
Note
When bar is up, valve is open. |
4 - | Shutoff valve for coolant of high voltage battery -N540- |
q | Removing and installing → Chapter |
5 - | Temperature sender before high voltage heater (PTC) -G785- |
q | Removing and installing → Chapter |
6 - | Coolant circulation pump before high voltage PTC heater -V509- |
q | Removing and installing → Chapter |
7 - | Electrical air conditioner compressor -V470- |
q | Removing and installing → Chapter |
8 - | High voltage heater (PTC) -Z115- |
q | Removing and installing → Chapter |
9 - | Refrigerant shutoff valve for heater and air conditioner -N541- |
q | Removing and installing → Chapter |
Note
t | Refrigerant shutoff valve for heater and air conditioning system -N541- and refrigerant shutoff valve for heat exchanger of high voltage battery -N542- must be open for filling and extraction of refrigerant. |
t | When filling and extracting refrigerant, a voltage of 12V must be applied to the shutoff valves. |
10 - | Heat exchanger for high voltage battery -VX63- |
q | Removing and installing → Chapter |
11 - | Refrigerant shutoff valve for heat exchanger of high voltage battery -N542- |
q | Removing and installing → Chapter |
Note
t | Refrigerant shutoff valve for air conditioning system -N541- and refrigerant shutoff valve for heat exchanger of high voltage battery -N542- must be open for filling and extraction of refrigerant. |
t | When filling and extracting refrigerant, a voltage of 12V must be applied to the shutoff valves. |