volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing coolant circulation pump before power electronicsV508

Golf Mk6

Removing
Removing
–  Observe general warning instructions for work on high voltage system → Chapter.
   
–  Clamp off coolant hoses using hose clamps up to 25 mm -3094-.
–  Loosen clip -4-.
  WARNING
Danger of scalding injuries.
When the engine is warm, the coolant temperature may be above 100 °C. The cooling system is pressurised.
If necessary, release pressure and reduce temperature before carrying out repairs.
–  Pull off coolant hoses from coolant circulation pump before power electronics -V508--1-.
  N80-10330
–  Separate wiring connector -2- from coolant circulation pump before power electronics -V508--1-.
–  Unscrew bolts -3- (8 ± 0.8 Nm) and remove coolant circulation pump before power electronics -V508--1-.
  N80-10330

Installing > < Removing and installing coolant circulation pump before power electronicsV508