Golf Mk6
Assembly overview - hydraulics (RHD) |
1 - | Brake fluid reservoir |
2 - | Seal |
q | For plastic supply hose |
q | The seals must be located in supply hose |
3 - | Supply hose |
q | Made of plastic |
q | May be made of rubber → Item |
4 - | Master cylinder |
q | Removing and installing → Chapter |
5 - | Clip |
q | Pull clip out to stop to remove or install pipe line |
q | Is also pulled out to side in some master cylinders. |
6 - | Seal / O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to configuration of line connection → Fig. |
q | Allocation → Electronic parts catalogue (ETKA) |
7 - | Retainer |
q | To remove and install, separate master cylinder from clutch pedal (⇒ Removing and installing clutch pedal) |
q | Removing and installing, Golf 2004 ►, Golf 2009 ► LHD, Golf 2009 ► RHD, Golf Plus → Chapter |
q | Passat |
8 - | Clutch pedal |
Removing and installing, Golf 2004 ►, Golf 2009 ► LHD, Golf 2009 ► RHD, Golf Plus → Chapter |
q | Removing and installing, Passat → Chapter |
9 - | Hexagon nut, → Item |
10 - | Bracket |
q | Secured to body |
11 - | Pipe line |
q | Pipe and hose/pipe line → Item may be in one piece |
q | Allocation → Electronic parts catalogue (ETKA) |
q | To remove, remove battery and battery tray → Electrical system; Rep. gr.27. |
12 - | Seal / O-ring |
q | Pipe → Item and hose/pipe line may be in one piece |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to configuration of line connection → Fig. |
q | Allocation → Electronic parts catalogue (ETKA) |
13 - | Pipe/hose line |
q | Pipe → Item and hose/pipe line may be in one piece |
q | Allocation → Electronic parts catalogue (ETKA) |
q | To remove, remove battery and battery tray → Electrical system; Rep. gr.27. |
14 - | Bracket |
q | Secured to retainer for ABS/EDL |
15 - | Bracket |
q | For ABS/EDL |
16 - | Seal / O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to configuration of line connection → Fig. |
q | Allocation → Electronic parts catalogue (ETKA) |
17 - | Clip |
q | Pull out clip to stop to remove and install pipe/hose line |
18 - | Slave cylinder |
q | Removing and installing → Chapter |
19 - | Hexagon bolt → Item |
20 - | Bleeder valve |
q | Bleeding clutch system → Chapter |
21 - | Dust cap |
22 - | Gearbox |
23 - | Bracket |
24 - | Hexagon bolt, 20 Nm |