–
| With engine »running«, screw in adapter for filling oil -VAS 6262/2- hand-tight. |
–
| Shake oil bottles before opening them. |
–
| Before screwing adapter for oil filling -VAS 6262 A- onto oil bottle, take note of the notes regarding the breather pipe → Anchor. |
–
| Pull off adapter for oil filling -VAS 6262- at quick-release connection and check: |
If ATF now flows out of hole in adapter: |
ATF does not need topping up. |
–
| Drain ATF until it drips. |
–
| Fit new seal to plug and tighten to 27 Nm. This concludes the ATF check. |
WARNING An ATF level which is too low or too high will impair the function of the gearbox. But if the gearbox was 2 litres low, it must be carefully inspected. There is probably a »major« leak. |
|
|
|
|