Golf Mk6
| Overview of selector mechanism in vehicles from 03.2009 onwards |
| 1 - | Selector cover with knob |
| q | Do not remove knob without reason. For emergency release, only the cover needs to be unclipped → Chapter. |
| q | Right knob in figure: first pull button far enough out of knob until a small gap is visible between knob and button. Button locks in this position when released. Secure button against being pressed in with a cable tie or wire. |
| q | Left grip in figure: button engages in installation position when handle is pulled off. Do not continue to press button after removal, otherwise it will no longer be possible to install handle. |
| q | Removing and installing → Chapter |
| 2 - | Selector lever and selector mechanism with selector lever cable |
| q | With selector lever lock solenoid -N110- |
| q | Cable must not be greased |
| q | Removing and installing → Chapter |
| q | Checking → Chapter |
| q | Adjusting → Chapter |
| 3 - | Bolt |
| q | 8 Nm |
| 4 - | Hexagon flange nut |
| q | 8 Nm |
| q | Qty. 4 |
| 5 - | Selector lever housing |
| 6 - | Securing clip |
| q | Always renew after removing |
| 7 - | Securing clip |
| q | Always renew after removing |
