| Checking selector lever cable |
| The ease of movement is checked on the cable. Selector lever cable must be removed from gearbox so that its ease of movement can be checked. Put removed end down so it does not rub against anything. |
| The selector lever must be moved and then the cable must be reattached to the gearbox. |
| Then the selector lever cable must be adjusted → Chapter. |
| Do not grease connections of cable! |
| –
| Move selector lever to position »P« position. |
| –
| Remove cable from lever on gearbox. |
| –
| Move selector lever repeatedly from »P« to »S« and back to »P«. |
| l
| Selector lever must move easily. |
|
|
|
