| Always make sure that no dirt can enter an »open« gearbox. In particular, dirt entering an »exposed«mechatronic unit for dual clutch gearbox -J743- and/or oil pump can lead to gearbox failure. |
| t
| If gearbox covers have been unbolted or gearbox has no fluid, do not run engine or tow vehicle. |
| t
| First thoroughly clean connecting points and surrounding areas and then loosen bolts. |
| t
| When installing the gearbox, ensure that dowel sleeves between the engine and gearbox are correctly located. |
| t
| Place removed parts on a clean surface and cover them over. |
| t
| Do not use fluffy cloths. |
| t
| Use only clean plastic sheeting and paper. |
| t
| Install only clean parts; do not remove new parts from packaging until immediately before installing. |
| t
| If repair work cannot be performed immediately, carefully cover or seal components. |
|
|
|
