volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Specified torques > < Removing

Golf Mk6

Installing
Installing
Install in the reverse order of removal, observing the following:
  Note
Renew self-locking nuts.
   
Some cars have damping -arrow- on the clutch pedal mounting bracket.
Vehicles without knee airbag
–  Install crash bar -1- and tighten bolt -2- to specified torque → Chapter.
  N30-10195
Continuation for all
xterh
–  Mount cable guide -2- on steering column.
–  Install foot well vent -3-. → Heating, Air conditioning; Rep. gr.80
Vehicles with knee airbag
–  Install knee airbag bracket together with crash bar. → Interior equipment; Rep. gr.69
Continuation for all
–  Install trim and cover below trim on drive side → General body repairs, interior; Rep. gr.68.
  N30-10001
–  Push line -1- with seal -2- onto connection of master cylinder -4- until securing clip -3- engages audibly.
–  Test line by tugging on it.
–  After removing hose clamp -3094-, return supply hose to its original position, if necessary.
–  Bleed clutch system → Chapter.
–  Install battery → Electrical system; Rep. gr.27.
  A30-0130

Specified torques > < Removing