Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Renewing seal between gearbox and bevel box >
< Removing
Golf Mk6
Power transmission
6-speed manual gearbox 02Q
Final drive, differential, differential lock
Four-wheel drive - renewing flange shaft oil seals with gearbox and bevel box installed / newing_seal_for_right_flange_shaft/">Renewing seal for right flange shaft
Installing
Installing
Installing
–
Lightly oil outer circumference of new oil seal.
–
Drive in new seal to stop, being careful not to cant seal.
–
Fill space between sealing lip and dust lip
-arrow-
with sealing grease -G 052 128 A1-.
–
Carefully drive in right flange shaft; turn flange shaft so that bearing is not damaged.
–
Secure flange shaft using countersunk bolt and tighten to specified torque
→ Item
.
Carry out further installation in the reverse sequence noting the following points:
–
If the particulate filter support was removed on vehicles with particulate filter, this must now be reinstalled.
→ Rep. gr.26
–
Install right drive shaft
→ Running gear, axles, steering; Rep. gr.40
.
–
Install drive shaft heat shield, if present
-arrows-
→ Running gear, axles, steering; Rep. gr.40
.
Drive shaft heat shield is secured with 3 nuts, or with 2 nuts for some engines.
→ Running gear, axles, steering; Rep. gr.40
–
Check gear oil in bevel box
→ Chapter
.
–
Check gear oil in gearbox
→ Chapter
.
–
Install noise insulation
→ General body repairs, exterior; Rep. gr.50
.
–
Install wheel
→ Running gear, axles, steering; Repair group 44; Wheel bolt torque setting
.
Power transmission
6-speed manual gearbox 02Q
Final drive, differential, differential lock
Four-wheel drive - renewing flange shaft oil seals with gearbox and bevel box installed / newing_seal_for_right_flange_shaft/">Renewing seal for right flange shaft
Installing
Renewing seal between gearbox and bevel box >
< Removing