volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing > < Installing

Golf Mk6

Assembly sequence - Dismantling and assembling gearbox completely
Assembly sequence - Dismantling and assembling gearbox completely
Removing and installing gearbox housing cover, gearbox housing, selector shaft with selector mechanism cover, input shaft, output shaft, differential and selector mechanism.
   
Special tools and workshop equipment required
t  Support plate -VW 309-
t  Gearbox support -VW 353-
t  Drift -VW 295-
t  Drift sleeve -VW 244 B-
t  e.g. hot-air blower -V.A.G 1416-
t  Torque wrench -V.A.G 1331-
t  -Zweiarmabzieher Kukko 210.1-
t  -Stehbolzen M 8 x 100 mm-

   
t  Support bridge -30-211A-
t  Thrust piece -32 - 111-
t  Thrust piece from assembly tool -T10030/4-
t  Tube -VW 416 B-
t  Puller plate -T10408-
t  Thrust pieces -T10408/2-
t  Grips -T10408/3-
t  Hexagon bolts M7 x 35 with washers
t  Puller - 2 Kukko 18/1-

  W00-0633
t  Support device -T10323-
t  Assembly tool -3253/7-
t  Thrust piece -VW 433-
t  Torque wrench -V.A.G 1332-

   

Removing > < Installing