–
| Pull off gear wheel for 6th gear with inner race of cylindrical roller bearing for output shaft. |
A - | Two arm puller, e.g. -Kukko 20/10- |
B - | Hexagon bolt, M10 x 20, 17 mm AF |
Note 6th gear wheel with cylindrical roller bearing inner race can also be pulled off using two arm puller -T10040- and puller hooks -T10040/2A-. |
–
| If necessary, heat gear wheel slightly using hot air blower -V.A.G 1416-, for example. |
Pull off synchromeshed gear for 6th gear together with cylinder roller bearing inner race for input shaft, thrust washer and synchro-ring for 6th gear only or together with synchro-hub for 5th and 6th gears, needle bearing inner race for 6th gear and synchro-ring for 5th gear. |
|
|
|