volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Clutch, control|Clutch > < Assembly overview - clutch release mechanism

Golf Mk6

Repairing clutch release mechanism
Repairing clutch release mechanism
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
  W00-0427
Removing and installing clutch release lever with release bearing and guide sleeve
–  Remove bolts -arrows-.
–  Pull clutch release lever with release bearing and guide sleeve off input shaft and ball stud.
Install in reverse order of removal.
  A30-0066
Removing and installing guide sleeve
–  Push guide sleeve -3- upwards out of release bearing -2-.
–  Turn guide sleeve -3- about 90° in -direction of arrow- relative to release bearing -2- until locking lugs of guide sleeve align with grooves -4- of release bearing.
–  Pull guide sleeve out of release bearing in this position.
Install in reverse order of removal.
  N30-0354
Removing and installing release bearing
–  Press together retaining hooks -arrows- on back of clutch release lever and remove release bearing -A- from clutch release lever.
–  To install, press release bearing -A- into clutch release lever until retaining hooks -arrows- engage.
  A30-0068

Clutch, control|Clutch > < Assembly overview - clutch release mechanism