| Initiating basic adjustment |
| This teaches important settings into the mechatronic unit. Even important adjustments are taught in again, or reset to programmed points. These include, for example, the synchronisation points and »reference points« for the engaging lever and gear actuator. |
WARNING | Do not carry out basic adjustment without a reason unless requested to do so! |
|
| –
| Press the button DSG Mechatronic -J743- performing basic measurement only: |
| t
| if you are prompted to do so in „guided fault finding“ |
| t
| after you have processed a fault entry |
| t
| after you have installed a dual clutch |
| t
| or after you have installed a mechatronic unit |
|
|
|
