volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Locking devices > < Guided fault finding, vehicle self-diagnosis and testing
O-ring, seals, gaskets
O-ring, seals, gaskets
t  Always renew O-ring, seals and gaskets.
t  Thoroughly clean joint surfaces.
Before installing:
   
t  Before installing radial shaft seals, lightly oil outer diameter and half-fill space between sealing lips -arrow- with sealing grease -G 052 128 A1-.
t  Before installing radial shaft seals for propshaft flanges, lightly oil around outside circumference and between sealing lips with high performance oil -G 052 175 A1- for Haldex couplings.
t  The open side of the oil seal faces the side with fluid filling.
After installation:
t  Checking oil level or topping up oil in rear final drive, Golf 2004 ► and Passat 2006 ► → Chapter.
t  Checking oil level or topping up oil in rear final drive - Tiguan, Passat CC, CC, Passat 2011 ►, Sharan 2011 ► and Golf 2009 ► → Chapter.
t  Checking oil level or topping up oil in Haldex coupling, Golf 2004 ► and Passat 2006 ► → Chapter.
t  Checking oil level or topping up oil in Haldex clutch - Tiguan, Passat CC, CC, Passat 2011 ►, Sharan 2011 ► and Golf 2009 ► → Chapter.
  N32-0001

Locking devices > < Guided fault finding, vehicle self-diagnosis and testing