Golf Mk6
Assembly overview - injectors |
1 - | Injectors |
2 - | Bolt for clamping piece |
q | Renew |
Tighten securing bolts to a maximum of 1 to 2 Nm at first. |
After the high-pressure lines have been fitted. Final tightening torque: 8 Nm + turn 180° further. |
3 - | High-pressure fitting |
q | Counterhold when loosening high-pressure lines. |
4 - | Return lines retaining clip |
q | Do not reuse, renew |
q | Grease the retaining clip lightly before installing the injector. |
5 - | Copper washer |
q | Renew |
6 - | O-ring |
q | Renew |