Continuation for all vehicles: |
Note t
| Before carrying out further work, disconnect battery earth strap. Check whether a coded radio is fitted. Obtain anti-theft coding first if necessary. |
t
| All cable ties which are opened or cut through when cylinder head is removed must be fastened in the same position when cylinder head is installed. |
t
| All connectors which are separated during disassembly must be reconnected in the original position when installing. |
WARNING t
| When doing any repair work, especially in the engine compartment, pay attention to the following due to the cramped conditions: |
t
| Route all the various lines and electrical wiring so that they are in their original positions. |
t
| e.g. for fuel, hydraulics, activated charcoal filter system, coolant and refrigerant, brake fluid, vacuum. |
t
| Ensure that there is sufficient clearance to all moving or hot components. |
|
|
|
|