volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Engine oil > < Removing and installing oil sump

Golf Mk6

Removing and installing oil pump
Removing and installing oil pump
»Carry out the following work sequence«
   
Removing
–  Remove sump → Chapter.
–  When oil pump is to be renewed, unscrew bolts -4- and remove oil intake pipe -3-.
–  Unscrew bolts -arrows- and remove baffle -2-.
–  Detach oil pump -1- from toothed belt and remove pump.
  A17-10547
Installing
l  Specified torques → Chapter.
Installation is carried out in the reverse order; note the following:
  Note
Renew O-ring.
–  Insert new dowel sleeves when oil pump has no dowel sleeves -arrows- for centring oil pump.
–  Check oil pump for ease of movement, turn toothed belt pulley with one finger for this.
  Note
Renew tight or sticking oil pump.
–  Check toothed belt for oil pump.
  Note
t  Renew damaged toothed belt.
t  The toothed belt can sag after long use, this is not a fault.
–  Fit oil pump with toothed belt pulley into toothed belt and tighten along with baffle.
–  Install sump → Chapter.
–  Replenish engine oil and check oil level → Chapter.
  A17-10548

Engine oil > < Removing and installing oil sump