Golf Mk6
Assembly overview - poly V-belt drive (vehicles with tensioning element and air conditioner compressor) |
1 - | Poly V-belt |
q | Mark direction of rotation before removing. |
q | Check for wear. |
q | Do not kink. |
q | Removing and installing → Chapter |
2 - | Poly V-belt tensioning element |
q | Swing with open-end spanner to slacken poly V-belt → Chapter |
3 - | Belt pulley and vibration damper |
q | Assembly only possible in one position due to offset holes |
4 - | Bolt |
q | Renew. |
q | Use only genuine bolts → Parts Catalogue. |
q | 10 Nm + 90° |
5 - | Dowel sleeves |
q | Check for correct seating in ancillary bracket. |
6 - | Bracket |
q | For ancillaries. |
q | Removing and installing → Chapter |
7 - | 20 Nm + turn 180° further |
q | Renew. |
8 - | Alternator |
q | Removing and installing → Rep. gr.27. |
9 - | Air conditioner compressor |
q | Removing and installing → Rep. gr.87. |
10 - | Dowel sleeves |
q | Check for correct seating in ancillary bracket. |